Compact power Supply units of the new QUINT POWER generation maximize system availability. Even standard power circuit- breakers can be triggered quickly and reliably with SFB technology (Selective Fuse breaking Technology) with six times the nominal current for 12ms. Defective current paths are selectively disconnected the defect is limited and the important system parts remain in operation. A comprehensive diagnosis is made by continuously monitoring the output voltage and current. This preventive function monitoring visualizes the critical operating modes and reports them to the control unit before an error occurs.QUINT POWER guarantees superior system availability. QUINT POWER offers the best conditions for universal operation worldwide with a wide-range input of 85-264V AC for all Single-Phase device, and 320-575V AC for all Three-Phase devices. Even if there is a power sag for more than 20ms, or phase failure, QUINT POWER still provides the full output. Efficiently Selective Securing Using SFB Technology.

In order to be able to trigger standard power circuit-breakers magnetically and quickly, power supply units must be able to supply multiple nominal Current for a short period. With SFB technology (Selective Fuse breaking Technology) with six times the nominal current for 12ms, this current reserve is always available.

QUINT SERIES SMPS FEATURES
Universal Input Voltage range ( AC & DC Input)
Output Voltage Range : 12V DC/ 24V DC/ 48V DC
Current Rating Range : 2.5A Upto 40Ampere
1F & 3F Version Available.
Selective Fuse breaking Technology (SFB)
POWER BOOST Technology means 50% Current Consumption.
Short Circuit Protection
Surge Voltage Protection
Potential Free contacts.

QUINT POWER & DC UPS :
Universal power supply with extensive product range, including special variants and accessories. Uninterruptible solutions DC-UPS 10, 20 and 40A, maintenance-free buffer module.Reliable starting of heavy loads with high inrush currents through Power Boost Power reserve.

Can be used worldwide in all industrial sectors thanks to the large approval package. High operational reliability even in the event of a permanent failure in one of the three phases.

The performance and reliability of a power supply is critical to the operation of control systems. Phoenix Contact power supplies are designed to meet exceed the demands of modern control systems in general purpose. Industrial and even mission critical applications. The comprehensive approval package with CB scheme and UL approval simplifies international applications.

The power supply is also suitable for use in series machine manufacture. It offers basic functions at a very high level. The wide range input of 85-264V for Single Phase and 3X320-375AC for Three Phase AC enables worldwide use.

The MTBF of 500,000h as well as the dielectric strength up to 300V ensures a high operating reliability. Even at high operating temperatures up to 55°C, the devices delivery the nominal values. The power supply units can be connected in parallel to increase the capacity and redundancy.

The LED function monitoring simplifies the startup. A third minus terminal simplifies the grounding on the secondary side. All power supply units are short circuit proof and provide a regulated and adjustable output voltage of 22.5VDC to 29.5VDC.

TRIO SERIES SMPS FEATURES
Input Voltage range AC Only
Output Voltage Range : 24V DC
Current Rating Range : 2.5A Upto 40Ampere
1F & 3F Version Available.
POWER BOOST Technology means 50% Current Consumption.
Short Circuit Protection
Surge Voltage Protection
Potential Free contacts.

With a design depth of just 58mm and a two-stepped housing, these low profile modules are the perfect size for installation in small distribution boards and operator panels.

The device family covers the complete voltage range of 5, 12, 15, 24 and 48V DC. A wide range input and long mains failure bridging times set standards the world over a current reserve of up to 100% ensures reliable startup of all loads.

Preventive function monitoring and parallel connections for increased performance and redundancy are further good reasons for using these reliable power supply units.

STEP SERIES SMPS FEATURES
Input Voltage range AC Only
Output Voltage Range : 5V DC/12V DC/15V DC/24V DC/48V DC
Current Rating Range : 0.75A/1.5A/1.75A/2A/2.5A/3A/4A/5A/6.5A
Surge Voltage Protection

With design widths of only 22.5, 45 and 67.5mm, the MINI POWER supply units are particularly slim and space saving.

The 85-264V AC or 90-350V DC wide range input and an international approvals package offer the best conditions for worldwide use. High operating safety is guaranteed by the mains failure bridging time of more than 20ms under full load.

Preventive function monitoring is professionally guaranteed via an active switching output for remote diagnosis. The parallel connection of the power supply units provides an increase in performance or redundancy. Due to the wide temperature range, the devices are suitable for operation from -25° C to + 70° C. Other advantages are clear LED signaling, adjustable output voltage and optimum device connections.

MINI SERIES SMPS FEATURES
Input Voltage range AC Only
Output Voltage Range : 5V DC/10-15V DC/24V DC
Current Rating Range : 1A/1.3A/1.5A/2A/3A/4A/5A/8A
Surge Voltage Protection
DC TO DC Converter